All-exhausted Temperature Chamber, SPH, Espec Mã đặt hàng: 6604

All-exhausted Temperature Chamber, SPH, Espec (Mã đặt hàng: 6604)

Thông tin tồn kho:
Liên hệ
Mã sản phẩm Series SPH
Thương hiệu: Espec
Đơn vị tính: Cái
Quy cách đóng gói: Đang cập nhật
Trọng lượng tạm tính: Đang cập nhật

1. Features

High-safety all-exhaust method

The air in the chamber is exhausted to the outside. The chamber is filled with fresh air heated by heater.

Advanced temperature control

The temperature fluctuation ±0.5°C (100°C) and ±1.0°C (200°C) can be obtained thanks to preheating heater.

Adopted uninterruptible power supply

An uninterruptible power supply is adopted to prevent circulating mechanism from stopping by power failure. Additional safety is pursued by using such optional equipment as gas detector.

Photo: Uninterruptible power supply

Uninterruptible power supply

Equipped with explosion vent (safety door)

Controlling gas concentration low can not prevent explosion totally. Some gases may explode even if their concentrations are low. In those cases, the explosion vent will protect you.

Figure: Explosive pressure is released from the above when explosion occurs in the chamber.

Explosive pressure is released from the above when explosion occurs in the chamber.

Contamination control of specimens

The specimen is protected from contaminations caused by substances generated when specimen are heated.

Construction

Construction

  • Air flows like arrows in the right figure.
  • The air is heated in the suction box and introduced to chamber.
  • The air in the chamber is not circulated and exhausted to outside.

[Conventional method]

Figure: Conventional method

Figure: In case of SPH-201S and 301S

(In case of SPH-201S and 301S)

2. Specifications

Model SPH-202S SPH-302S SPH-402S
System All-exhaust method (non-circulating method)
Power supply 200V AC 3φ 50/60Hz
Max. power consumption 7.7KVA 10.5KVA 28.0KVA
Performance Temperature range (ambient temp.+40°C) to +200°C
Temperature fluctuation ±0.5°C(+100°C)
±1.0°C(+200°C)
Temperature uniformity ±1.5°C(+100°C)
±3.0°C(+200°C)
 ±3.0°C(+100°C)
±5.0°C(+200°C)		 ±4.0°C(+100°C)
±7.0°C(+200°C)
Temperature heat-up and pull-down rates* Within 60 min. from ambient temp. to +200°C Within 70 min. from ambient temp. to +200°C
Exhaust volume About 60m³/h About 80m³/h About 110m³/h
Capacity 216L 512L 1000L
Dimensions Inner dimensions W600 × H600 × D600mm W800 × H800 × D800mm W1000 × H1000 × D1000mm
Outer dimensions W1190 × H1910 × D785mm W1500 × H2300 × D1065mm W1930 × H1800 × D1925mm
Weight 270kg 370kg 600kg
Instrumentation Setting and indication ranges Temperature: 0 to +210°C
Time: 0 to 99 hrs 59 min, 100 to 999 hrs 
(1 hour unit for more than 100 hrs)
Setting and indication resolution Temperature:1°C
Time:1 min.
Program function Programmable of 2 steps (2-step fixed)

* The model name may be changed.

Tags: All-exhausted Temperature Chamber, SPH, Espec, all exhausted temperature chamber sph espec, series sph, espec

0 Khách hàng đã đánh giá về sản phẩm này
0/5
5
0%
4
0%
3
0%
2
0%
1
0%