Thiết bị trượt dò lực xoắn, momen (Mã đặt hàng: 641)

Form

DI-12-SL4

DI-12-SL02

DI-12-SL15

Operating range

0.030～4.000　N・m　

1.5～200.0　mN・m

0.30～15.00　N・m

accuracy

±1% (500 or less digit±5digit)

±0.5%  (200 or less digit±1digit)

Display　

The 4 figures digital display of LCD

The measurement direction

CW-CCW (right and left)A display will be the display of only an absolute value.
Load of + (the CW direction) and - (the direction of CCW) is carried out to a data output.

Measure-ment Mode

P-P(peak)

The peak load value hold.Destructive torque (the CW direction) -- it loosens and torque (the direction of CCW) is measured.

T-R(truck)

A display changes with load change.

PD
judging mode

The judgment of slide torque and the judgment of the yield point are performed.
(Only the CW direction) 

Detection judging

If a slide torque value is detected, you will be told about by green lamp lighting.(at the time of RG mode) 

Measurement start value setup

The value which starts measurement (start of judgment operation) is set up.
( 0.001 N-m unit from 0 N-m) 

Continuation data output

A load torque value is outputted for every fixed time during measurement in RG mode.
By creating a torque wave, loci, such as slide torque, yield point torque, and destructive torque, can be judged.

Auto-power-off

Automatically power off after 5 minutes left without operation

Bit plug form

HEX　6.35

fai 4　

6.35sq

Data output

ASCII format　(baud rate 9600). A measurement result is outputted.

Outside dimension

Detector

fai 44×190　Other projection thing

fai 20×145　

fai 55×270　

Indicator

166(W)×142(D)×48(H)

Weight　

Detector

About 820g　

About 80ｇ

About 1.5kｇ

Indicator

About1kg

Accessories

(one piece each)

Bit　＋　#1　#2

Bit　＋　#0

An inspection report, a proofreading certificate, a traceability system figure