Specification | DIS-IP05 | DIS-IP5 | DIS-IP50 | DIS-IP200 | DIS-IP500 |
Measuring range (at time of Track) | 2.0~500 mN・m 0.20~50 kgf・cm 0.20~45 lbf・in | 0.020~5 N・m 0.20~50 kgf・cm 0.20~45 lbf・in | 0.20~50 N・m 2.0~500 kgf・cm 2.0~450 lbf・in | 2.0~200 N・m 20~2000 kgf・cm 20~1740 lbf・in | 2.0~500 N・m 20~5000 kgf・cm 20~4500 lbf・in |
Accuracy | ±0.5% (499 or less digit±3digit) |
Display | The 4 figures digital display of LCD |
The measurement direction | CW-CCW (right and left) |
Measuring mode | P-P Peak | Peak load value hold. |
T-R Track | Indication of real time torque value. |
P-D Peak down | Holding Load Value at the moment to change from upward to downword |
C Real-time output | Load torque value is outputted every about1/ 180 second . |
Decision function | Setting of torque value | A Maximum and a minimum value are in a measuring range, and a setup is possible. Can confirm the set value by the buzzer sound or LED. |
The Maximum, the minimum, and the average value | The maximum, the minimum value, and average value of the saved data |
Automatic Clearance | Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance |
One-touch zero | Easy Zero-Adjustment with pressing CLEAR button |
Data spec. | Data transfer | ASCII fomat (Baud rate :19200) |
Data memory | 800 data |
Power supply | Ni-Cd chargeable battery 1.2V×5cells 700mAh |
Auto power save | 10 minutes no use, automatically switch off. |
Charging time | about 3 hours |
Continunous working time | 12 hours |
Meter outside type dimension | 100(W) x105(D) x40 (H) (It does not contain by the projection thing.) |
Weight | Meter part 520g |
Code length | Standard 1m (there are automatic machines no less than 4m as an option.) |
Accessories (one piece each) | AC/DC adaptor |
An inspection report, a proofreading certificate, a traceability system figure
|