Thiết bị kiểm tra lực Momen Xoắn Cedar CD-100M, dải đo 1-100kgf cm (Mã đặt hàng: 646)

Specification

CD－100M

CD－10M

Measuring range  
(at the time of Track)

0.10～10　N・m

0.010～1 N・m　

1.0～100 kgf・cm

0.10～10 kgf・cm

1.0～90 lbf・in

0.10～9  lbf・in

Accuracy

±0.5％(199 or less digit±1digit)

Display

The 3.5 figures digital display of LCD

The measurement direction

CW-CCW (right and left)

Measurement   Mode

Track , P-P(peak to peak) , P-D(Peak-Down) , C(Real-time Output)

High and low limits judging function

High and low value are measurement within the limits, and can be set up.

Real-time Output

Load torque value is outputted every about1/ 180 second.

The Maximum, the minimum, and the average value display

The maximum, the minimum value, and average value of the saved data

Automatic Clearance

Automatically clear the displayed value after certain time
(0.5 - 3.0 sec,selectable at each 0.5 sec).
Setting 0.0 sec for manual Zero clearance

One-touch zero

A clear button is pushed and it is a zero.　 Data is outputed.

Data output

ASCII format (baud rate 19200)

Power supply

Ni-Cd chargeable battery 1.2V×5cells 700mAh

Auto power save

10 minutes no use, automatically switch off.

Charging time

About 3 hours

Continunous working time

About 12 hours

Socket fit mouth

□ 20mm/  □9.5mm

Weight

 Abbreviation   1 kg

Outside dimension

160（W）×125（D）×55（H）

Attachment

Measurement joint　SJ50/SJ10K

Measurement joint　SJ10

Accessories
(one piece each)

AC/DC adaptor

Carrying case

An inspection report, a proofreading certificate, traceability system figure

SJ50

SJ10

About an adapter

It does not decompose, even if it rewinds joint too much
Since the adapter attached is the coil spring compression system of the conventional system, you can use it by the conventional management method.
Moreover, this adapter is special structure. It does not decompose, even if it rewinds joint too much. You can use it in comfort.