Nhiệt kế hồng ngoại Sato SK-8300, dải đo lớn -30°C đến 1550°C (Mã đặt hàng: 2600)

Instance surface temperature measurement:
The advantage of the non-contact infrared method is quick-response measurement. And this single-hand-held unit allows easy operation by use of the trigger type measurement button.

High-temperature measurement:
Wide measurement range of -30 to 1550°C The laser marker indicates the spot of measurement with a clear point.

Distance to measurement spot ration (D:S):
About 50:1 (D:Measurement distance, S:Spot).

Alarm function of upper and lower thresholds:
Alarm is triggered when a measured temperature value exceeds upper or lower set value.

Data Memory function:
Store up to 10 data.

Various indications:
MAX(Maximum temperature value), MIN(Minimum temperature value),AVG(Average temperature value), ΔT(Difference between maximum and minimum temperature values)

Auto Measurement function:
Continuous measurement without holding the trigger down

Backlight function:
The backlit LCD facilitates to read measured values in dark.

Auto Power-Off function:
This function conserves battery power when you forgot to turn the power off.

Tripod fixable:
The unit can be fixed to a tripod for measurement.

Class II Laser Product with PSC mark:
This product is designed to comply with portable laser instrument Consumer Product Safety Act.

Cat. No.

No.8268-00

Model

SK-8300

Measuring range

-30°C to 1550°C

Accuracy

-30.0°C to -20.1°C : ± 3°C
-20.0°C to 100.0°C  : ± 2°C
Other then above : ± 2%rdg
(Condition: Ambient temperature at 23°C ± 5°C, calibrated by black body emissivity at 0.95

Resolution

0.1°C

Emissivity

Adjustable at 0.01 within 0.10 to 1.00
Refer to the emissivity table

Distance to spot ratio

D:S = approx. 50:1 (D: Distance, S: Spot size)

Sensing element

Thermopile

Spectral response

8 to 14μm

Laser Marker

Class II laser product with PSC mark
Wavelength: 650mm Output: less than 1mW

Operation ambient

0 to 50°C for temperature, less than 85%rh for humidity (no condensing)

Storage ambient

-10 to 50°C for temperature, less than 85%rh for humidity (condensing)

Power requirements

9VDC (Battery (006P) x 1 pc.)

Power consumption

40mA (When laser and backlight ON)

Battery life

Approx. 8 hours continuous use (use of alkali battery)
(When laser and backlight ON under normal temperature)

Backlight

LCD with backlight

Weight and dimensions

Approx 280g (including battery) (W)51 x (H)200 x (D)166mm

Accessories

9V alkali battery x 2 pcs. (one is factory set), hand strap, hard case