Vertical System
|
Bandwidth |
200 MHz |
Rise time |
1.75 ns |
Input Channels |
4 |
Bandwidth Limiters |
20 MHz |
Input Impedance |
1 MΩ ± 1.0% || 16 pF ± 2 pF, 50 Ω ± 1.0% |
Input Coupling |
AC, DC, GND |
Maximum Input Voltage |
1 MΩ: ± 250 Vpk, 50 Ω: 5 VRMS |
Channel-Channel Isolation |
≥ 52 dB at 100 MHz |
Vertical Resolution |
8 bits |
Sensitivity |
1 MΩ: 2 mV/div - 10 V/div
50 Ω: 2 mV/div - 1 V/div |
DC Gain Accuracy |
±1.5% |
Offset Range |
±1 V: 2 mV/div - 99 mV/div
±10 V: 100 mV/div - 1.0 V/div
±100 V: 1.02 V/div - 10 V/div |
|
Horizontal System
|
Time/Division Range |
200 ps/div - 1000 s/div |
Clock Accuracy |
5 ppm |
Trigger and Interpolator Jitter |
3 ps (rms) |
|
Acquisition System
|
Single-Shot Sample Rate/Ch |
2.5 GS/s |
Equivalent Sample Rate |
50 GS/s |
Memory |
32 Mpts/Ch on 2 Ch
16 Mpts/Ch on 4 Ch |
|
Acquisition Modes
|
Averaging |
Up to 1,000,000 |
Peak Detect |
na |
Interpolation |
Linear, Sin x/x |
Enhanced Resolution |
Up to 11 bits |
Sequence Mode |
Up to 5,000 segments |
|
Triggering System
|
Modes |
Normal, Auto, Single, Stop |
Sources |
Ch 1 - Ch 4, EXT, EXT/10, AC Line |
Coupling Mode |
AC, DC, LF Rej, HF Rej, |
Pre-trigger Delay |
0 - 100% Full Scale |
Post-trigger Delay |
0 - 10,000 Divisions |
Trigger Sensitivity |
1.0 division: 200 MHz |
External Trigger Sensitivity |
Ext: 50 mV from DC to 10 MHz
100 mV from 10 MHz to 200 MHz
Ext/10: 0.5 V from DC to 10 MHz
2.0 mV from 10 MHz to 200 MHz |
External Trigger Input Range |
Ext: ±0.4 V, EXT/10: ±4.0 V |
|
Display
|
Type |
Color Touch Screen 10.4" TFT-LCD |
Resolution |
SVGA: 800 x 600 |
Grid Styles |
YT, XY |
|
Trigger Types
|
Standard Triggers |
Edge, Glitch, Width, Logic (Pattern), TV (NTSC, PAL, SECAM, HDTV), Runt, Slew Rate, Interval, Dropout, Qualified |
Optional Advanced Triggers |
na |
Optional Serial Data Triggers |
I2C, SPI, UART/RS-232, CAN, LIN, FlexRay, MIL-STD-1553, ARINC 429, Audio (I2S, LJ, RJ, TDM), USB, MIPI D-PHY, DigRF3G |
|
Internal Storage
|
Waveform Storage |
4 memory waveforms plus internal HDD |
Setup Storage |
6 setups |
|
Math
|
Number of Math Traces |
1 |
Standard Math Functions |
Add, Subtract, Multiply, Divide, FFT, Absolute Value, Averaging (summed and continuous), Derivative, Envelope, Enhanced Resolution, Floor, Integral, Invert, Reciprocal, Rescale, Roof, Square, Square Root |
Optional Math Functions |
na |
|
Measurements
|
Number of Measurements Displayed |
6 |
Measurement Parameters |
Ampltidue, Area, Base, Delay, Duty Cycle, Fall Time (90% - 10%), Fall Time (80% - 20%), Frequency, Maximum, Mean, Minimum, Overshoot+, Overshoot-, Period, Peak-Peak, Phase, Rise Time (10% - 90%), Rise Time (20% - 80%), RMS, Skew, Standard Deviation, Top, Width+, Width- |
|
Probes
|
Probes |
Qty. (4) ÷10 Passive Probes |
Scale Factors |
Automatic/Manual: ÷1, ÷10, ÷20, ÷100, ÷200, ÷1000, ÷2000, ÷10000
Variable: (÷1x10-6 - ÷10000) |
Calibration Output |
1 kHz square wave, 1.0 Vp-p, output to probe hook |
|
Interface
|
GPIB Port (optional) |
1 (optional) |
USB (Device) |
0 |
Ethernet Port |
1 |
USB (Host) |
5 |
Serial Port |
1 |
|
Power Requirements
|
Voltage |
90 - 264 VAC, 47 HZ - 63 Hz
90 - 132 VAC, 380 HZ - 420 Hz |
Max. Power Consumption |
340 VA |
|
Environmental and Safety
|
Temperature (Operating) |
5 °C to 40 °C |
Temperature (Non-Operating) |
-20 °C to 60 °C |
Humidity (Operating) |
80% RH, 31 °C
50% RH, 40 °C |
Humidity (Non-Operating) |
95% RH |
Altitude (Operating) |
2000 m |
Altitude (Non-Operating) |
12,192 m |
|
Physical Dimensions
|
Dimensions (HWD) |
260 mm x 340 mm x 152 mm
(10.25" x 13.4" x 6") |
Weight |
7.26 kg. (16.0 lbs.) |