Vertical System
|
Bandwidth |
350 MHz |
Rise time |
1 ns |
Input Channels |
4 |
Bandwidth Limiters |
20 MHz, 100 MHz |
Input Impedance |
1 MΩ ± 1.5% || 16 pF, 50 Ω ± 1.5% |
Input Coupling |
AC, DC, GND |
Maximum Input Voltage |
1 MΩ: ± 400 Vpk, 50 Ω: 5 VRMS |
Channel-Channel Isolation |
≥ 34 dB from DC - 100 MHz
≥ 30 dB at 350 MHz |
Vertical Resolution |
8 bits |
Sensitivity |
1 MΩ: 2 mV/div - 10 V/div
50 Ω: 2 mV/div - 2 V/div |
DC Gain Accuracy |
±(1.5% + 0.5% of Full Scale) |
Offset Range |
±1 V: 2 mV/div - 50 mV/div
±10 V: 50.2 mV/div - 500 mV/div
±100 V: 502 mV/div - 10 V/div |
|
Horizontal System
|
Time/Division Range |
1 ns/div - 50 s/div |
Clock Accuracy |
10 ppm |
Trigger and Interpolator Jitter |
200 ps (pk-pk) |
|
Acquisition System
|
Single-Shot Sample Rate/Ch |
2 GS/s on 1 Ch
1 GS/s on 2 Ch |
Equivalent Sample Rate |
100 GS/s |
Memory |
500 kpts/Ch |
|
Acquisition Modes
|
Averaging |
Selectable Number of Sweeps:
4, 16, 32, 64, 128, 256 |
Peak Detect |
1 ns |
Interpolation |
Linear |
Enhanced Resolution |
na |
Sequence Mode |
na |
|
Triggering System
|
Modes |
Normal, Auto, Single, Stop |
Sources |
Ch 1 - Ch 4, EXT, EXT/10, AC Line |
Coupling Mode |
AC, DC, LF Rej, HF Rej, |
Hold-off by Time or Events |
200 ns - 50 s |
Internal Trigger Range |
±5 divisions from center |
Trigger Sensitivity |
0.5 division: DC - 10 MHz
2.0 divisions: 10 MHz - 350 MHz |
External Trigger Sensitivity |
Ext: 50 mV from DC to 10 MHz
250 mV from 10 MHz to 350 MHz
Ext/10: 0.5 V from DC to 10 MHz
2.5 mV from 10 MHz to 350 MHz |
External Trigger Input Range |
Ext: ±0.5 V, EXT/10: ±5.0 V |
|
Display
|
Type |
Color 7.5" TFT-LCD |
Resolution |
VGA: 640 x 480 |
Grid Styles |
YT, XY |
|
Trigger Types
|
Optional Advanced Triggers |
na |
Optional Serial Data Triggers |
na |
|
Internal Storage
|
Waveform Storage |
1 reference waveform |
Setup Storage |
5 setups |
|
Math
|
Number of Math Traces |
1 |
Standard Math Functions |
Add, Subtract, Multiply, FFT |
Optional Math Functions |
na |
|
Measurements
|
Number of Measurements Displayed |
4 |
Measurement Parameters |
Base, Cyclical Mean, Cyclical RMS, Duty Cycle, Fall Time (90% - 10%), Fall Time (80% - 20%), Frequency Integral, Maximum, Mean, Minimum, Number of +Pulses, Number of -Pulses, +Overshoot, -Overshoot, Peak-Peak, +Pulse Width, -Pulse Width, Rise Time (20% - 80%), Rise Time (10% - 90%), RMS, Skew, Skew@level, Top, Top-BAse |
|
Probes
|
Probes |
Qty. (4) ÷10 Passive Probes |
Scale Factors |
Automatic: ÷1, ÷10, ÷100, ÷1000
Manual: ÷1, ÷10, ÷20, ÷100, ÷200, ÷1000, ÷2000 |
Calibration Output |
1 kHz square wave, 0.6 Vp-p (typical), output to probe hook |
|
Interface
|
GPIB Port (optional) |
1 (optional) |
USB (Device) |
1 |
Ethernet Port |
1 (optional) |
USB (Host) |
1 |
Serial Port |
na |
|
Power Requirements
|
Voltage |
90 - 264 VAC, 47 HZ - 420 Hz |
Max. Power Consumption |
75 VA |
|
Environmental and Safety
|
Temperature (Operating) |
0 °C to 40 °C |
Temperature (Non-Operating) |
-20 °C to 60 °C |
Humidity (Operating) |
80% RH, 40 °C |
Humidity (Non-Operating) |
80% RH, 40 °C |
Altitude (Operating) |
2000 m |
Altitude (Non-Operating) |
15000 m |
|
Physical Dimensions
|
Dimensions (HWD) |
190 mm x 285 mm x 102 mm
(7.5" x 11.2" x 4") |
Weight |
3.2 kg (7 lbs) |