Máy ghi nhận phân tích dữ liệu liên tục 10mV đến 50V Hioki 8870-20 (Mã đặt hàng: 2703)

Save important waveform images instantly with the press the press of a button. Review images by flipping through each file on the widescreen display.

Isolated analog channel inputs provide CAT II overvoltage protection safety for measurements of up to 300 V AC and DC (maximum terminal-to-ground rating). This capability enables safe simultaneous voltage measurements of inverter primary and secondary and stacked battery cells without damaging the instrument. It features 300 V isolation between measurement terminals and HiCORDER chassis, and 300 V isolation between measurement terminals.

Connect to a PC with the supplied USB cable to easily download data that has been automatically saved to a CF card. Use the supplied dedicated application program to display and print waveforms on the PC. Users can experience the benefit of easy USB 2.0 data transfer, and a dedicated application program for displaying and printing waveforms.*

Data is simply saved to a CF card. When the HiCORDER is connected to a PC via USB 2.0, the data is quickly copied from the installed card to the PC: 20,000 waveform screen divisions transfer in about 20 seconds.

Volume and weight have both been reduced by 60% from HIOKI's previously most compact MEMORY HiCORDER, the 8807-01, to just 40% the volume and 55% the weight. Easily pack it in your briefcase to accompany you wherever you go. The 8870-20 is only 176mm wide, 101mm high, and 41mm thick. It also weighs only 600g, even with the battery pack installed.

* Note: The CF card installed in the HiCORDER appears as a removable disk on the PC, but communication functions such as the capability to change HiCORDER settings from the PC are not available.