Buồng tách từ trường loại cảm ứng từ Kanetec KID-R90-3 (Mã đặt hàng: 1768)

INDUCTION TYPE MAGNETIC SEPARATOR

KANETEC KID-R90-3

Application
These separators are suitable for separation of weak magnetic substances that exist in powder and bulk materials of quartz sand (glass material), high grade casting sand and chromite sand. In addition, these separators are used to remove iron ores from such nonferrous minerals as tungsten, manganese ore, titanium ore, monazite, garnet and ilmenite, to remove weak magnetic oxides from casting sand (quartz sand) and to separate weak magnetic substances from other powder and bulk materials.

Features
The induction roller generates 2.6 T max. (Tesla) at a sharp gradient and high magnetic flux density.
The magnetic force can easily be adjusted according to magnetic substances in raw materials.
The roller revolution can be varied steplessly.
According to properties of raw materials, the influence of the centrifugal force by the roller can be adjusted to optimum separation. (Optional)
When the 2-stage or 3-stage type is used, highly efficient separation is possible.
These separators are of dry type that does not need auxiliary equipment for pre- and post-treatment.
These separators are designed to contain dust to prevent pollution by dust.

Conditions of substances to process

Optimum substances to process are dry and flow freely and their grain size is from 8 to 150 mesh.

Capacity

The amount to process is about 200 kg/h to 1000 kg/h per induction roller width 100 mm, though it varies according to kinds and grain sizes of substances to separate and required level of separation.

One-stage or 2-stage according to applications

Because a high magnetic force is required, the magnetomotive force is induced by the roller by use of yoke so that weak magnetic substances can be separated from flowing raw materials. The figure shows the 3-stage type. One-stage, 2-stage and 3-stage are determined by the number of induction rollers.