Bàn đo lực Shimpo FGS-50XB-L/H (Mã đặt hàng: 893)

Various movement modes are available for the digital force gauge (push-pull gauge), e.g. jogging and repeated reciprocation, according to the purpose of measurement and the intended use of the test object. Five positions and stopping times are programmable. An analog output enables a connection to a pen recorder to record the displacement. Provided with an emergency stop switch to support a safe test environment.

Various movement modes are available for the force gauge, e.g. jogging and repeated reciprocation, according to the purpose and intended use.

Equipped with an analog output to record the displacement. (There is also a series with a length measuring unit capable of displaying moving distances to two decimal places.)

Capable of stepless travel speed adjustment.

Ten positions and stopping times are programmable.

It is possible to stop the movement with a comparator output signal (when an FGX Series force gauge is mounted).

Equipped with an emergency stop switch.

Format

Horizontal type

For the low-speed

For high-speed

FGS-50XB-L

FGS-50XB-H

Withstand load

500.0 (50kg)

Feed rate

5~120mm / min

20~500mm / min

It can be two types of speed switched to stepless

Stroke

140mm (Yes mechanical backlash of about 0.2~0.5mm)

Display: moving speed display

5.0~120.0mm / min

20.0~500.0mm / min

Moving distance display

0.0~140.0mm

Repeat count display

0-9999

Output signal

Analog voltage output:. Movement amount output 10mV / mm MAX stand ± 1.4V RS-232C Yes

Input

Overload input: FGX, overload in the FGP - Stop the stand with earth output

Alarm

Stop the motor when the stand of the motor overload

Height adjustment range

0~35mm

Measuring table

100 × 125mm

Operating temperature limit

0~45 ℃ (but with no condensation)

Power supply

AC100V (± 10%) 2.5A

Mass

22kg

Accessories

Force gauge for power with AC socket, FGP connection cable, analog output cable

Other

Emergency stop switch