Thiết bị đo nhiệt độ bằng tia hồng ngoại SK-Sato SK-8940 ,-40°C đến 500°C (Mã đặt hàng: 2860)

Model

SK-8940

Measuring range

-40 to 500°C

Accuracy

± 2°C or ± 2% rdg at -19.9 to 450.0°C

± 4°C or ± 4%rdg at -40.0 to 20.0°C or -451.0 to 500.0°C

(conditions)

Ambient temperature at 23°C ± 5°C
calibrated by black body emissivity at 0.95

Resolution

1°C at higher than 100°C
0.1°C at other than above

Emissivity (*1)

Adjustable at 0.01 within 0.30 and 1.00

Distance to spot ratio
(*2)

10 : 1

Sensor

Thermopile

Spectral response (*3)

8 to 14μm

Response time

0.5 second

Laser sighting

1 point, Class II Laser (use less than 1mW of power)

Wave length

650 nm

Output

less than 1mW

Operating ambient

0 to 50°C for temperature
less than 80%rh for humidity (no condensing)

Storage ambient

-20 to 50°C for temperature
less than 90%rh for humidity (no condensing)

Power requirement

9VDC battery x 1

Power consumption

max. 40mA (when Laser ON)

Battery Life

approx. 5 hours (Laser & Backlight ON)
approx. 12 hours (Laser ON & Backlight OFF)
approx. 8 hours (Laser OFF & Backlight ON)
approx. 55 hours (Laser & Backlight OFF)

Functions

Adjustable emissivity
Backlight ON/OFF
Laser marker ON/OFF
Auto power off
Auto hold

Dimensions

(W) 45 x (H) 157 x (D) 80 mm

Weight

approx. 151 g (with battery)

Materials

Unit: ABS resin

Standard accessories

9V battery x 2 (one is factory set), Hand straps, Soft pouch

(*1) Emissivity:
An object's ability to emit or absorb energy. Perfect emitters have an emissivity of 1. An object with emissivity of 0.8 absorbs 80% and reflects 20% of the incidental energy. Emissivity may vary with temperature and spectral response (wavelength).

(*2) Distance to spot ratio (D:S)
The infrared thermometer focuses infrared energy form an object onto its detector at the rate. 10:1 distance to spot ratio means that the infrared thermometer will read 50mm diameter area 500mm away. For higher accuracy, make sure the area of the object is at least twice as large as the spot being measured

(*3) Spectral Response:
The specific wavelength region where an infrared thermometer responds (in the 0.7 to 20μm band of the electromagnetic spectrum). Instrument response is dependent on the emissivity, reflectance, and the transmission of infrared energy.

Positional Relation between Distance and Sighting Point

This is a one-point laser-sighting thermometer. The laser mark is sighted approximately 14 mm above the center of the spot.

(When the distance is approximately 280 mm)

When the measurement distance is approximately 280 mm, the laser marker is output aiming at the point illustrated above. Refer to the figure as a guide.