Thiết bị đo lực Shimpo FGPX-250H (Mã đặt hàng: 886)

The measuring range is from 2,500N to 5,000N. A high-performance digital force gauge (push-pull gauge) with enhanced data management and communication functions. The enhanced functions include: compatibility with Digimatic signals, LEDs to indicate the results, a hold function for holding the indicated value, and a tare deduction setting function. A USB interface is provided for connection to a computer.

LED indication of results
The LED indicator (HI, LO, or OK) allows the results to be checked immediately.
Digimatic signals
The force gauge can be connected to a Mitutoyo Digimatic Printer.
External signals
A hold function for holding the indicated value and a zeroing function for tare deduction settings have been added.
Memory function
Three memory modes are provided: Continuous, Single, and Standard. Can store up to 1,000 sets of measurement data (Continuous memory mode).
USB communication
The data can be transferred to a personal computer through a USB port. Specialized software TORIEMON USB enables easy data transfer.

Model

High load FGPX-H Series

FGPX-250H

FGPX-500H

Rated capacity (RC)

± 2500N

± 5000N

± 250Kg

± 500Kg

Display range

± 2500N

± 5000N

± 250.0Kg

± 500.0Kg

Display resolution

1N / 0.1Kg

Measurement system

Normal measurement, plus peak measurement, minus peak measurement

Display cycle

1 times / sec, 2 times / sec, 3 times / sec., 5 times / sec, 10 times / sec, 20 times / sec.

Sampling period

1000 times / sec.

Accuracy

 ± 0.2% RC and ± 1/2 digit (at 23 ℃)

 Temperature effect

 Gain: ± 0.02% / LOAD / ℃, zero: ± 0.02% / RC / ° C. 
(zero point drift can be canceled by the tracking function)

Indicator

LCD signed a four-digit display (character height 12mm)

 Judgment LED (Hi_NG, OK, Lo_NG) 3 pieces

Overload capacity

150% RC

Comparator function

Hi_NG, OK, to determine the Lo_NG, and output in the determination LED and the output signal

Communication

USB

Yes (can communicate with the PC by a dedicated communications software. Connection cable is standard accessory)

RS-232C

Yes (can communicate with the PC by a dedicated communication command. Connection cable is optional)

Digimatic

Mitutoyo can be connected to Digimatic printer DP-1VR

Analog

± 1V (output to ± display range), accuracy ± 50mV, 12bit D / A converter system

Output update 1000 times / sec zero can be set, load resistance 10kΩ or more

Output

Overload

PUSH, PULL open collector output (maximum DC30V / 5mA)

Comparator

HI, OK, LO open collector output (maximum DC30V / 5mA)

Input signal

ZERO (external zero setting), HOLD (external hold)

Power supply

AC adapter (DC9V / 200mA) or built-in nickel-metal hydride battery (rechargeable)

Charge during the measurement possible battery operating time: about 8 hours after full charge

Charging time: up to 16 hours (end automatically when it comes to full charge)

Auto power-off function

10 minutes (when the AC adapter connection is possible continuous use), invalid settings are also possible

Memory function
 

Continuous memory 1,000 / single memory 100 cases / standard memory 50 items 
(three types of memory mode switchable) 
Yes statistics function (maximum, minimum, peak, average, standard deviation)

Operating temperature limit

0 ~ 40 ℃ (but without condensation)

Operating humidity range

35 ~ 85% RH (but no condensation)

External dimensions

Width 82 × thickness 57 × length 214mm

Mass

About 900g

About 1000g

Accessories

Measurement adapter (6 types), hanger, AC adapter, carrying case, USB cable, handle

Communications software

Dedicated communication software free download from (USB compatible) Homepage