Máy hiện sóng độ nét cao Teledyne lecroy HDO4022 (HD) Mã đặt hàng: 17744

Máy hiện sóng độ nét cao Teledyne lecroy HDO4022 (HD) (Mã đặt hàng: 17744)

Xem tất cả 60 sản phẩm của thương hiệu Teledyne Lecroy

Ứng dụng: thiết bị dùng để đo lường điện áp, các xung dao động theo thời gian, biểu thị những biến động của dòng điện trên màn hình ở dạng đồ thị. Trục X thể hiện thời gian, trục Y thể hiện số điện áp và trục Z thể hiện cường độ sáng.

Thông tin tồn kho:
Liên hệ
Mã sản phẩm HDO4022
Thương hiệu: Teledyne lecroy
Đơn vị tính: Cái
Quy cách đóng gói: Đang cập nhật
Trọng lượng tạm tính: 5.86Kg
Bandwidth: 200 MHz
Rise time: 1.75 ns
Input Channels : 2

Hãng sản xuất: Teledyne LeCroy - USA

Model: HDO4022

 

Vertical System
Bandwidth 200 MHz
Rise time 1.75 ns
Input Channels 2
Bandwidth Limiters 20 MHz
Input Impedance 1 MΩ ±2.0% || 15 pF, 50 Ω ±2.0%
Input Coupling AC, DC, GND
Maximum Input Voltage 1 MΩ: 400 V max (DC + Peak AC ≤ 10 Khz), 50 Ω: 5 VRMS
Channel-Channel Isolation ≥ 30 dB
Vertical Resolution 12-bits
Sensitivity 1 MΩ: 1 mV/div - 10 V/div
50 Ω: 1mV/div - 1 V/div
DC Gain Accuracy ±(0.5%) Full Scale, offset at 0 V
Offset Range 50Ω
+/-1.6V: 1mV/div-4.95mV/div
+/-4V: 5mV/div-9.9mV/div
+/-8V: 10mV/div-19.8mV/div
+/-10V: 20mV/div-1V/div

1MΩ
+/-1.6V: 1mV/div-4.95mV/div
+/-4V: 5mV/div-9.9mV/div
+/-8V: 10mV/div-19.8mV/div
+/-16V: 20mV/div-100mV/div
+/-80V: 102mV/div-198mV/div
+/-160V: 200mV/div-1V/div
+/-400V: 1.02V/div-10V/div
 

Horizontal System
Time/Division Range 20 ps/div - 10000 s/div
Clock Accuracy ±2.5ppm for 5 to 40C + 1.0ppm/year from calibration
Trigger and Interpolator Jitter 4.5 ps (rms)
 

Acquisition System
Single-Shot Sample Rate/Ch 2.5 GS/s
Equivalent Sample Rate 125 GS/s
Memory 25 Mpts/Ch on 1 Ch
12.5 Mpts/Ch on 2 Ch
 

Acquisition Modes
Averaging Up to 1,000,000
Peak Detect na
Interpolation Linear, Sin x/x
Enhanced Resolution Up to 15 bits
Sequence Mode Up to 10,000 segments
 

Triggering System
Modes Normal, Auto, Single, Stop
Sources Ch 1 - Ch 4, EXT, EXT/10, AC Line
Coupling Mode AC, DC, LF Rej, HF Rej
Pre-trigger Delay 0-100% of full scale
Post-trigger Delay 0-10,000 Divisions
Hold-off by Time or Events 2ns up to 20s
Internal Trigger Range ±4.1 Divisions
Trigger Sensitivity 0.9 division: 10 MHz
1.0 divisions: 100 MHz
2.0 divisions: 200 MHz
External Trigger Sensitivity 0.9 division: 10 MHz
1.0 divisions: 100 MHz
2.0 divisions: 200 MHz
External Trigger Input Range Ext: ±0.4 V, EXT/10: ±4.0 V
 

Display
Type Color Touch Screen 12.1" TFT-LCD
Resolution 1280 x 800
Grid Styles YT, XY
 

Trigger Types
Standard Triggers Edge, Glitch, Width, Logic (Pattern), TV (NTSC, PAL, SECAM, HDTV), Runt, Slew Rate, Interval, Dropout, Qualified
Optional Advanced Triggers na
Optional Serial Data Triggers I2C, SPI, UART/RS-232, CAN, LIN, FlexRay, SENT, MIL-STD-1553, ARINC 429, Audio (I2S, LJ, RJ, TDM), USB, USB-HSIC, MIPI D-PHY, DigRF3G
 

Internal Storage
Waveform Storage 4 memory waveforms plus internal HDD
Setup Storage 6 setups
 

Math
Number of Math Traces 2
Standard Math Functions Add, Subtract, Multiply, Divide, FFT, Absolute Value, Averaging (summed and continuous), Derivative, Envelope, Enhanced Resolution, Floor, Integral, Invert, Reciprocal, Rescale, Roof, Square, Square Root, Trend, Zoom
Optional Math Functions na
 

Measurements
Number of Measurements Displayed 8
Measurement Parameters Ampltidue, Area, Base, Delay, Delta Period @ Level, Delta Time @ Level, Duty Cycle, Duty @ Level, Edge @ Level, Fall Time (90% - 10%), Fall Time (80% - 20%), Frequency, Frequency @ Level, Maximum, Mean, Minimum, Overshoot+, Overshoot-, Period, Peak-Peak, Period, Period @ Level, Phase, Rise Time (10% - 90%), Rise Time (20% - 80%), RMS, Skew, Standard Deviation, Time @ Level, Top, Width+, Width-
 

Probes
Probes Qty. (4) ÷10 Passive Probes
Scale Factors Automatic/Manual: ÷1, ÷10, ÷20, ÷100, ÷200, ÷1000, ÷2000, ÷10000
Variable: (÷1x10-6 - ÷10000)
Calibration Output 1 kHz square wave, 1.0 Vp-p,
output to probe hook
 

Interface
GPIB Port (optional) 1 (optional)
USB (Device) 1
Ethernet Port 1
USB (Host) 6
Serial Port 0
 

Power Requirements
Voltage 90 - 264 VAC, 45 HZ - 66 Hz
90 - 132 VAC, 380 HZ - 420 Hz
Max. Power Consumption 330 VA
 

Environmental and Safety
Temperature (Operating) 5 °C to 40 °C
Temperature (Non-Operating) -20 °C to 60 °C
Humidity (Operating) 80% RH, 31 °C
50% RH, 40 °C
Humidity (Non-Operating) 95% RH
Altitude (Operating) 3,048 m max at <=30C
Altitude (Non-Operating) 12,192 m
 

Physical Dimensions
Dimensions (HWD) 291.7 mm x 399.4 mm x 131.31 mm
(11.48" x 15.72" x 5.17")
Weight 5.86 kg (12.9 lbs)

Tags: Máy hiện sóng độ nét cao Teledyne lecroy HDO4022 (HD) , may hien song do net cao teledyne lecroy hdo4022 hd, hdo4022, teledyne lecroy, teledyne lecroy

0 Khách hàng đã đánh giá về sản phẩm này
0/5
5
0%
4
0%
3
0%
2
0%
1
0%