Digital push pull gauge
Brand: Aikoh
Specifications
Model: RX Series
The RX Series are up-to-date models that remarkably change the functions of digital push-pull gauges currently in use and the concept of maintenance. They are especially superior in response, accuracy, operation efficiency and durability. The also feature small size, clear display on large-size screens, screen reversing and other various functions shown below, fit-to-hand shape and operation buttons. With these features, the RX Series digital push-pull gauges greatly surpass the traditional concept.
Optional Features of RX Series
- Easy-to-observe large display and display reversing function
- Memory function: Up to 1000 data at any point of time
- Insertion and pull-out tests in one-time measurement
- NO, GO, NO judgment displayed on lamps
- Remaining battery capacity display
- Real-time high-speed communication (at 38400 bps)
- Automatic power off function
- Stores the basic set data even when the battery is replaced
- Original load calibration guarantees high precision
Optional Cables for RX Series
Analog output calbe RX-OP-1
RS232 interface cable RX-OP-2
Mitutoyo printer cable RX-OP-3
Mitutoyo Digimatic Input Calbe RX-OP-4
External Control Cable RX-OP-5
Stand Control & RS232 Interface Cable RX-OP-6
Stand Control Cable RX-OP-7
RX Series Model List
Model
|
RX-1
|
RX-2
|
RX-5
|
RX-10
|
RX-20
|
RX-50
|
RX-100
|
Measurement Range
|
1kgf (10N)
|
2kgf (20N)
|
5kgf (50N)
|
10kgf (100N)
|
20kgf (200N)
|
50kgf (500N)
|
100kgf (1000N
|
Min. Display Unit
|
0.1gf (0.001N)
|
1gf (0.01N)
|
1gf (0.01N)
|
1gf (0.01N)
|
10gf (0.1N)
|
10gf (0.1N)
|
10gf (0.1N)
|
Top Shaft
|
M6
|
M6
|
M6
|
M6
|
M6
|
M6
|
M6
|
Standard Specifications of RX Series
Measurement Unit
|
kgf, N, Lgf
|
Measurement Item
|
Max. value & instantaneous value
|
Accuracy
|
+/-0.2% F.S.
|
Sampling Frequency
|
50, 16, 5 & 12.5 ms
|
Display refreshing freq
|
1,2,5,10 & 20 times/sec
|
Display
|
Six-digit LCD, 44 x 44mm
|
A/D Converter
|
16-bit, 100kHz
|
CPU in use
|
16-bit, single-chip CPU
|
Analog Output
|
+/-2 V/FS
|
Communication Output
|
RX-232C, 38400 bps
|
Printer Output
|
SANEI Thermal Printer, Mitutoyo Digital Output
|
Go-NG judgement
|
Lamp indication & output
|
Stand Connection output
|
Overload, zero reset & external input display hold contact
|
Continuous run time
|
Approx. 12 hours
|
Use temperature
|
0 to 40 degree celcius
|
Weight
|
Approx. 500g
|
Power Source
|
NiCD & AC Adaptor
|