Bộ nguồn Kikusui PCR2000M Mã đặt hàng: 40972

Bộ nguồn Kikusui PCR2000M (Mã đặt hàng: 40972)

Xem tất cả 34 sản phẩm của thương hiệu Kikusui

Ứng dụng: Thiết kế tiện lợi, nhiêu tính năng

Thông tin tồn kho:
Liên hệ
Mã sản phẩm PCR2000M
Thương hiệu: Kikusui
Đơn vị tính: Cái
Quy cách đóng gói: Đang cập nhật
Trọng lượng tạm tính: 1Kg
Kích thước (WxHxD): 429x128x450(mm)
Trọng lượng: 15kg
Dải tần số đầu ra: 500 Hz
Dòng điện đầu ra tối đa: 20 A (phạm vi 135 V) hoặc 10 A (dải 270 V)

Features

 

  • Compact design
  • Small and easy to carry - 429W x 128H x 450D, weighs only 15 kg
  • Versatile output modes: AC, DC, AC+DC *1
  • Output frequency range is up to 500 Hz (setting resolution 0.1Hz)
  • High-quality output waveform Output voltage varies between 1 V and 135 V or 2 V and 270 V (two ranges)
  • Maximum output current is 20 A (135 V range) or 10 A (270 V range)
  • Copes with high inrush loads
  • Output waveform distortion 0.5 % or less
  • Memory feature
  • You can store and recall three combinations of settings for voltage and frequency
  • The memory feature allows recording of changes in output *2
  • Measurement features
  • You can measure the voltage, current and power of AC and DC output, apparent power, reactive power, power factor, crest factor and current peak hold *3
  • Analog interface
  • By incorporating an optional interface (EX04-PCR-M), output can be controlled using external analogue signals
  • Input DC signals can be used to change output AC voltage and modulate output using input waveform
  • Control using a PC
  • You can control the PCR-M Series through the standard RS-232C interface, optional GPIB interface, or optional USB interface *4
  • By using the control software (Easy Controller for PCR-M Series) that comes with the PCR-M Series, you can easily set the parameters of the PCR-M Series and log the output measured values
  • *1 : You can access AC+DC mode if you have installed an optional interface board: IB21, US21 or EX04-PCR-M - the communications interface is used to set that mode
  • *2 : An installed appropriate optional interface board allows up to ten combinations of settings to be stored in memory The communications interface is also used to set or call extended memory addresses (4 to 10)
  • *3 : Use the communications interface to measure apparent power (VA), reactive power (VAR), power factor (PF), crest factor (CF), and held current peak
  • *4 : Instrument drivers for Microsoft Visual Basic, Microsoft Office VBA, Microsoft Visual C++ LabVIEW, or LabWindows/CVI are also included on the disc

 

0 Khách hàng đã đánh giá về sản phẩm này
0/5
5
0%
4
0%
3
0%
2
0%
1
0%