Chuyên nghiệp & tận tâm

Digital indicator F325 UNIPULSE
Click vào hình lớn để xem ảnh phóng to

Digital indicator F325 UNIPULSE

Giá: Liên hệ   (Chính sách giá)
Thời gian giao hàng: Liên hệ
Trọng lượng: 0 kg
Địa điểm giao hàng: Thỏa thuận    (Chính sách giao hàng)
Bảo hành: Liên hệ    (Chính sách bảo hành)

Tel: 08.22.640.640 (Bộ phận kinh doanh Thiết Bị Đo Lường)

Email/skype: doluong@thegioicongnghiep.com - Hotline: 0938.762.061 (Miền Nam)

Email/skype: doluong01@thegioicongnghiep.com - Hotline: 0938.764.061 (Miền Bắc)

Tên sản phẩm: Digital indicator
Model: F325
Thương hiệu: UNIPULSE


Specifications

 

ANALOG SECTION

Excitation voltage

DC10V or 2.5V±10%(switchable
Output current: within 30mA

Signal input range

3.0~+3.0mV/V

Equiv. input cal. range

0.5~+3.0mV/V

Equiv. input cal. error

within 0.1/FSat 0.5mV/V input

ZeroGain adjustment

Automatic adjustment by digital processing

Minimum input sensitivity

1μV/count
1/10000 guaranteed at 1mV/V input
at excitation voltage10V

Accuracy

Non-linearity 

0.02%/FS±1digit at 3mV/V input

 

Zero drift 

within 0.5μV/ RTI

 

Gain drift 

within 25ppm/

A/D converter

Speed 

30, 300, 3000 times/secselectable

 

Resolution 

24bitbinary

Analog filter

Primary low-pass filter 
select frequency from 10, 30, 100, 300, 1k, 3k, 10k or 30kHz

Digital filter

Filter1Bessel low-pass filtersecondary
Cut-off frequency can be set to any value from 1/300 to 1/10 of sampling speed. It can be turned off. 
3000times/sec10300Hz, 300times/sec1.030.0Hz, 30times/sec0.13.00Hz
Filter2Moving average
You can set the value anywhere between 1 to 999 times.

Resolution

1/30000at 3.0mV/V input

Monitor output

Sensor input of approx. 2V per 1mV/VInput resistance over 2kΩ

Hold function

Sample or peak holdYou can chose either analogue or digital peak hold from setting menu. Frequency response of analogue hold is 1kHz

 

DISPLAY SECTION

Display unit

15mm character height:7-segment green LED5-digits

Numerical value 

5-digits Indicated value:-19999~+99999

 

Decimal points 

Selectable decimal point displaying position
  0.000, 0.00, 0.0, 0

Display items

Status display 

red 3φLEDHI, LO, PEAK, HOLD  green 3φLEDOK

 

Display frequency 

selectable from 3, 6, 13 and 25 times/sec

 

EXTERNAL INPUT/OUTPUT SIGNAL

 External input
3

DZHOLDH.RESET
Volt-free contact input
External devices can be connected, such as relays, switches, transistors and so on. The signal can be outputted by making short-circuit between input and common terminal. 
In case transistor is connected, please use NPN (sink) transistor .
Internal power supply voltageDC12V, When short-circuitedApprox. 4mA
DC-Input for both plus common and minus common type>(please specify the type of input when ordering
External devices can be connected, such as relays, switches, transistors and so on. Input signal is outputted by applying voltage between input and common terminal.
In case a transistor is connected, please use NPN type for plus common and PNP type for minus common.
Maximum Rated Voltage: DC27.6V, "ON": when the voltage is above DC 9V (Load Current: approx. 10mA at DC24V), "OFF: " below DC3V.

External output
5

HI, OK, LO, Output Selection 1, Output Selection 2
Assign output from various selection: HH, LL, Overload, RUN, HOLD, NZ, DZ response 
PhotoMOS relay outputcommon for sink and source type 
Maximum rated voltage: DC30V, maximum rated current: 100mA, operating time : approx. 1 msec

 

INTERFACE

 

RS-485 communication interface Modbus-RTU /UNI-formator SI/FUnipulse original serial interface
BCD parallel data output interfacesink type)(Option
BCD parallel data output interfacesource type)(Option
D/A convertervoltage output)(Option
D/A convertercurrent output)(Option
RS-232C communication interfaceOption

 

GENERAL SPECIFICATIONS

Power supply voltage

AC100V240V+10%-15%)(free power supply50/60Hz
DC12V24V±15%)(please specify the type of input when ordering

Power consumption

10W max

Rush current(Typ) AC spec.

2A, 1msecAC100V average load condition
cold start at room temperature
4A, 1msecAC200V average load condition
cold start at room temperature

Rush current(Typ) DC spec.

2A, 20msecDC12V average load condition
cold start at room temperature
1A, 50msecDC24V average load condition
cold start at room temperature

Operation condition

Operation temperature range:-10+40 Storage temperature range:-40+80
Humidity:85%RH or less(non-condensing)

External dimensions

96(W)×48(H)×132.5(D)(mm) (not including projections)

Panel cutout size

92×45(+1-0) (mm)

Weight

Approx. 600g

 

Accessories

 

AC input cord* 1
3P-2P conversion adapter* 1
Terminator RS-485 is selected) 1
BCD output connector BCD output option is selected) 1
F325 operation manual 1
* Included only for AC specifications

 

 

Option

Model

Description

BCO

BCD parallel data output interfacesink type

BSC

BCD parallel data output interfacesource type

DAV

D/A convertervoltage output

DAI

D/A convertercurrent output

232

RS-232C communication interface

 

 



Digital indicator F325 UNIPULSE

Giá: Liên hệ

Tua vít lực RTD500CN Tohnichi

Giá: 4,420,000 đ

Mỏ lết cân lực GEK135-W36 KTC

Giá: 8,100,000 đ

Cờ lê lực mỏ lết GEK085-W36 KTC

Giá: 6,950,000 đ

outsize figure IP50 Cedar

Giá: Liên hệ

Cờ lê lực GEK200-W36 KTC

Giá: 10,120,000 đ

Thiết bị đo lực FGJN-50 Shimpo

Giá: 10,050,000 đ

Cờ lê lực CL140Nx15D Tohnichi

Giá: Liên hệ

Đầu lục giác HH15D x 8 Tohnichi

Giá: Liên hệ

Mũi vặn vít 4 cạnh 2H-P2 Tone

Giá: Liên hệ

Tua vít đo lực 20DSPK Kanon

Giá: Liên hệ

16 sản phẩm